We supply and install a wide variety of automatic barrier systems, designed for most applications including pedestrian control, car parking and general boundaries. |
|
Provides security against unwanted vehicles entering your property and controls traffic flow
May be used in conjunction with a computerised swipe card system which will record individuals and their entry and exit time |
 |
 |
The Normal barrier is suitable for entrances up to 6 meters wide.
The single phase motor and oil filled gearbox are combined in a custom designed sealed unit offering years of trouble free service.
In the event of a power failure the barrier can be easily raised using the supplied hand crank
A powerful 3 phase motor coupled with a large reduction gearbox enables the Industrial barrier to raise an arm up to 12 meters in lenth in just 12 seconds.
In the event of a power failure the barrier can be easily raised using the supplied hand crank. |
|
|
|
 |
The Challenger Rising Arm Car Park Barrier is reliable, sturdy and uncompromising. A popular choice which is quick to install, simple to operate and very cost effective.
Manufactured from high quality steel and combining inverter drives and relay logic, the Challenger provides smooth and consistent operation in the most demanding parking environments. These include underground and surface area staff and visitor car parks in commercial, retail, public and private sector car parks.
The Challenger barrier can be controlled from a manned security point or by the vehicle occupant, using a wide range of access control systems. Proximity card, radio, token, keypad and intercom to name, but a few. These combined with induction loop or photocell facilities ensure that the barrier arm will open/close smoothly, safely and efficiently upon activation
Challenger conforms to BS6571 is CE Approved and meets the stringent requirements of local authorities, government departments, The Ministry of Defence and other specifying bodies in the UK and international market places. |
|
| |
| Construction |
Frame - Steel; Arm - Aluminium |
| Spans |
2000mm to 7000mm (6000mm maximum with PVC curtain) |
| Finish |
Cabinet - Red (Corporate colours available upon request);
Arm - Red |
| Drive Unit |
Motor and Gearbox |
| Operating Speed |
2.5 to 6.0 Seconds |
| Dimensions |
See details overleaf |
| Operating Supply |
230V 1Ph 50Hz - 6 Amps |
| Manual Operation |
Incorporated as standard |
| Control Options |
Card, Radio, Token, Keypad, Intercom, Push Button, Vehicle Transponder, Induction Loop and Photocell |
| Accessories |
Corporate colours, Stop Signs, Boom Lights, PVC Curtain, Various Tip Support Posts and Card Reader Mounting Posts |
|
|
|
|
|
 |
 |
| |
|
The Heavy Duty Rising Arm Car Park and Traffic Barrier is perfect for lorry parks, warehouses, freight depots, road and private rail bridges. Simple to operate it will withstand the extremes of traffic flow, site and weather conditions.
Capable of spanning openings of up to 9 metres, the tough and durable unit is operated by a powerful motor and gearbox drive unit, which is inverter driven and housed in a steel/fibreglass enclosure. Operation is provided by a single-phase power supply. The sturdy aluminium barrier arm can be fitted with a long lasting and lightweight PVC half or full height curtain.
The Heavy Duty barrier can be controlled from a manned security point or by the vehicle occupant, using a wide range of access control systems. Proximity card, radio, token, keypad and intercom combined with induction loop or photocell safety and close facilities, ensure the barrier arm will open smoothly and efficiently upon activation, every time. Conforms to BS6571 and is CE Approved |
|
| |
| Construction |
Frame - Steel; Arm - Aluminium; Top Cover - Fibreglass |
| Spans |
Up to 9000mm (8000mm with half-height curtain and 6500mm with high-bar curtain) |
| Finish |
Frame and Barrier Arm - Red; Top Cover - White |
| Dimensions |
See details overleaf |
| Operating Supply |
230V 1Ph 50Hz - 6 Amps |
| Manual Control |
Incorporated as standard |
| Control Options |
Card, Radio, Token, Keypad, Intercom, Push Button, Vehicle Transponder, Induction Loops and Photocell |
| Accessories |
Corporate Colours, Stop Signs, Boom Lights, PVC Curtain (half-height and full-height), Various Tip Support Posts and Card Reader Mounting Posts |
|
|
|
|
|
 |
Height Restriction Car Park Barrier prevents access to un-authorised areas, such as staff car parks or underground car parks, with height limitations. A
Manual Swing Arm Height Restrictor is also available, fitted with a release mechanism, which allows entry for authorised vehicles only |
| |
| Construction |
Frame - Steel; Arm - Aluminium |
| Spans |
2000mm to 6000mm (Typical) |
| Heights |
2000mm to 4000mm (Typical) |
| Finish |
Standard is Red (Corporate colours available upon request);
Arm - Black & Yellow |
|
|
|
|
|
|
|
|
|
|
Easy to operate counterbalanced barrier to control vehicle access. Extruded aluminium boom arm up to nine metres in length with fitted handle and receiving post with locking facility. Posts are finished in epoxy powder coating, the boom is of aluminium construction
A range of barriers constructed in box section steel or tubular steel depending on customer requirements.
Telescopic barrier versions also available. A cost effective solution to close off entrances and exits where there is sufficient room to allow the barrier to swing through 180o. Height restriction posts can be used to prevent lorries or vans gaining access into restricted areas.
Robust telescopic post to prevent unauthorised parking and protect vulnerable areas. Constructed from box section steel with lifting handle and padlock latch facility. Height above ground level 610mm (765mm below ground). |
|
|
 |
Manual Rising Arm Car Park Barrier is an ideal solution for staff parking areas of larger multi-use sites. Constructed from steel rectangular hollow section, it boasts a sturdy arm to prevent access to un-authorised areas. Lockable in both open and closed positions providing peace of mind during overnight periods when the parking area is not in use. The aluminium pole arm can span openings of up to 8.5 metres (17 metres with a pair of barriers |
| |
| Construction |
Frame - Steel; Arm - Aluminium |
| Spans |
2000mm to 8500mm (7500mm maximum with PVC curtain) |
| Finish |
Pedestal - Red (Corporate colours available upon request)
Arm - Red (Corporate colours available upon request) |
| Accessories |
Corporate colours, Stop Signs, PVC Curtain (half-height only), Various Tip Support posts. |
|
|
|
|
|
 |
Manual Swing Car Park Barrier is an ideal solution for staff parking areas of larger multi-use sites. Constructed from steel rectangular hollow section, it boasts a sturdy arm to prevent access to un-authorised areas. Lockable in both open and closed positions providing peace of mind during overnight periods when the parking area is not in use, the barrier is supplied with two locking posts as standard. The steel barrier arm can span openings of up to 8 metres (17 metres with a pair of barriers |
| |
|
To
discuss your detailed requirements further, please contact our technical
sales team.
BECKLAND HILL, EAST MARKHAM, NEWARK, NOTTINGHAMSHIRE, NG22 0QP
TEL: 0845 2576175 | FAX: 08712 088772 |
email: sales@total-fencing.co.uk
|
|
|
