As one of the UK's leading distributors and UK installers of automatic barriers and automatic parking barrier systems we can specify the ideal solution for your requirements. Our range of CAME automatic barriers offer a competitive solution for most applications and we can also provide bespoke tailor made solutions if required. |
|
|
- Spans up to 6 metres.
- Adjustable speed control varying from 1.2 to 6 seconds.
- Pole Diameter 75mm.
- 240 AC Single Phase Supply
- Heavy duty Gearbox and 3 phase motor drive (no springs required) allowing a smooth operation via the inverter 100% Duty Cycle.
- Entry/Exit and Safety loop detector bases already built in.
- Programmable Logic Controller pre-programmed to suit all types of access control equipment
|
|
|
|
- Spans up to 9 metres.
- Adjustable speed control varying from 6 to 9 seconds.
- Pole Diameter 100mm.
- 240 AC Single Phase Supply
- Heavy duty Gearbox and 3 phase motor drive (no springs required) allowing a smooth operation via the inverter, 100% Duty Cycle.
- Entry/Exit and Safety loop detector bases already built in.
- Programmable Logic Controller pre-programmed to suit all types of access control equipment
|
|
|
|
- Prevents pedestrians from gaining access by going under the barrier arm.
- Folds vertically when barrier arm is raised.
- Made from lightweight materials to reduce the additional load on the barrier motor.
- Spans up to 8 metres.
|
|
|
 |
- Prevents pedestrians from gaining access by going either under or over the barrier arm.
- Folds vertically when barrier arm is raised.
- Made from lightweight materials to reduce the additional load on the barrier motor.
- Spans up to 6.5 metres.
Download the Brochure
 |
|
|
|
| Complete automatic barriers for
openings up to 2.5m
|
|
Kit Contents
| Item code |
Description |
Qty |
| G2500 |
Barrier in galvanised steel and painted RAL2005 |
1 |
| G0251 |
Aluminum arm, painted white 60x40x2700 |
1 |
| G0461 |
Red phosphorescent strips for arm |
1 |
| DOC-I |
Recessed safety photoelectric cells |
1 |
| DOC-LN |
Column for photoelectric cell (in black) |
1 |
Download the Brochure
|
| The automatic
barriers of the GARD Series are designed to be installed
both to the right and left of the passageway. These
automatic barriers are available also in the AISI 304
inox cabinet version |
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
 |
| |
|
| Complete automatic barriers designed
for openings up to 4m
|
|
Kit Contents
| Item code |
Description |
Qty |
| G4000 |
Barrier in galvanised steel and painted RAL2005 |
1 |
| G0401 |
Aluminum arm, painted white 60x40x4000 |
1 |
| G0461 |
Red phosphorescent strips for arm |
1 |
| DOC-I |
Recessed safety photoelectric cells |
1 |
| DOC-LN |
Column for photoelectric cell (in black) |
1 |
Download the Brochure
|
|
The GARD 4000 is supplied in the following kits with lowest prices available on all models:
- 4m Rectangular Arm with Floor Support G412
- 3.5m Rectangular Arm with Mobile Support Post (fixed to barrier)G413
- 2.5m Rectangular Arm with Bumper Strip, Light and Mobile Support Post G414
- 2.5m Rectangular Arm with Bumper Strip, Light and Hanging Skirt G415
- 3.5m Rectangular Arm with Bumper Strip, Light and Floor Support G416
- 4m Tubular Arm with Floor Support Post G422
All sets include photocells and arm flashes.
|
| The fully
modular structure of these automatic barriers allows
the cabinet to easily receive installation of all accessories
needed for system security, such as photoelectric cells,
flashing devices and sensitive edges. A total safety
system. Built into the unit, the control board for
these automatic barriers powers the motor and all the
accessories connected to the low voltage (24V) system. |
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
 |
| |
|
| Complete automatic barriers designed
for openings up to 6m
|
|
Kit Contents
| Item code |
Description |
Qty |
| G6000 |
Barrier in galvanised steel and painted RAL2005 |
1 |
| G0602 |
Tubular aluminum arm, painted white |
1 |
| G0461 |
Red phosphorescent strips for arm |
1 |
| G0605 |
Fitting for G0602 bar |
1 |
| DOC-I |
Recessed safety photoelectric cells |
1 |
| DOC-LN |
Column for photoelectric cell (in black) |
1 |
Download the Brochure
|
|
The GARD 6000 is supplied in the following kits with lowest prices available on all models:
- 6m Rectangular Arm with Floor Support Post G612
- 6m Rectangular arm with Mobile Support Post (Fixed to Barrier) G613
- 6m Rectangular Arm with Bumper Strip, Light and Mobile Support G614
- 5m Rectangular Arm with Bumper Strip, Light, 4m Hanging Skirt and Floor Support G615
- 6m Rectangular Arm with Bumper Strip, Lights and Floor Support G616
All kits include photcells and arm flashes
|
| Just like
the GARD 6000 S, this is another high performance automatic
barrier from the G6000 series which is suitable
for industrial and high-intensity use passages. As
in the other G6000 versions, the GARD 6000 T automatic
barriers are very carefully designed to ensure utmost
reliability and specialist features suitable for the
application context. The low-voltage operators and
assembly structure make these automatic barriers the
ideal solution for controlling work passage areas or
applications where fast, safe automation is necessary,
for large passageways |
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
 |
|
Complete automatic barriers for
openings up to 4m, the GARD 8000 series automatic barriers
are also avalable for openings up to 6m & 8m
|
|
Kit Contents
| Item code |
Description |
Qty |
| G2080 |
24V Barrier Unit |
1 |
| ZL38 |
24V Control Panel |
1 |
| G02801 |
Flashing Light |
1 |
| G04000 |
4m Barrier Arm Section |
1 |
| G02040 |
Yellow balancing spring (40mm diameter) |
1 |
| G04060 |
Green balancing spring (50mm diameter) |
1 |
| DIR10 |
Pair of safety photoelectric cells |
1 |
| G02802 |
Photoelectric cell support bracket |
1 |
| G02807 |
Fixed support for bar |
1 |
Download the Brochure
|
The GARD 8000 is supplied in the following kits with lowest prices available on all models:
- 230Vac Barrier Unit, 6m arm with floor support. G722
- 230Vac Barrier Unit, 6m arm with mobile support and 4m Skirt. G723
- 230Vac Barrier Unit, 6m arm with floor support and 6m Skirt. G725
- 24Vdc 7.6m arm with floor support. G842
- 24Vdc Barrier Unit, 6.5m arm with floor support and 6m skirt. G845
All kits come with control panels, flashing light, balancing springs, bar supports, photcells and brackets and arm flashes
|
| The new
CAME GARD series of automatic barriers implements
all the recommendations prescribed by the new European
standards generated by the new Machine Directives,
with the objective of meeting the criteria of utmost
modularity in terms of application and operations.
These automatic barriers are available in the
230V A.C. motor and the 24V D.C. motor versions, the
latter particularly ideal for frequent use |
|
|
 |
The CAT barrier is a highly technological product with a design for all contexts. The installation flexibility allows for creating automatic chains up to 16m with only two pillars and a single chain.
Automatic closure comes on after the preset time fully adjustable by a trimmer, whilst the operation speed is a swift 9-11 seconds.
This kit includes 1 230Vdc Bollard and control panel, slave bollard with counterweights, 9mm chain suitable for an 8m opening, complete radio gear and photoelectric beams for your safety. A floor channel is required to protect the chain |
|
|
 |
The CAT barrier is a highly technological product with a design for all contexts. The installation flexibility allows for creating automatic chains up to 16m with only two pillars and a single chain.
Automatic closure comes on after the preset time fully adjustable by a trimmer, whilst the operation speed is a swift 9-11 seconds.
This kit includes 1 240V dc Bollard and control panel, slave bollard with counterweights, 9mm chain suitable for an 8m opening, complete radio gear and photoelectric beams for your safety. A floor channel is required to protect the chain
|
Please note: G02803 and G02804
automatic barriers arm lighting shown in picture is not included in this standard kit
|
PLEASE
CALL 0845 2576175 FOR THE LATEST PRICES AND SIZE OPTIONS.
OUR DEDICATED TEAM ARE AVAILABLE MON - FRI, 09:00AM
- 17:00PM
& OUR HELPLINE IS AVAILABLE 24 /7 |
|
|
