PF-5700 Swinging Access Gate

Constructed from high quality steel hollow box section, the robust structure of the PF5700 swinging access gate means it is ideally employed in unmanned areas or in areas where there is a requirement for low volume traffic control.

The access gate can be locked in either the open or closed position via an additional latch post or a padlock respectively

.

PF-5700 Single Swinging Access Gate

• 100x100x4mm Mild Steel Square Hollow Section Posts.
• 60x60x3mm Mild Steel Gate.
• Spans from 3m to 6.5m manufactured to customer specification.
• Comes complete with padlock.
• Posts may be surface mounted or sunken.
• Can be supplied with additional latch post to lock in the open position.
• Powder Coated to Customer Specification or Galvanised finishes available.

PF-5700 Double Swinging Access Gate

• 100x100x4mm Mild Steel Square Hollow Section Posts.
• 60x60x3mm Mild Steel Gates.
• Spans from 6m to 13m manufactured to customer specification.
• Gates can either be latched together providing a large open entrance when gates are open. Or to a single centrepost providing two seperate entrances.
• Comes complete with padlock.
• Posts may be surface mounted or sunken.
• Can be supplied with additional latch post to lock in the open position.
• Powder Coated to Customer Specification or Galvanised finishes available.

PF-5700 Single Swinging Access Gate + Height Barrier

• 100x100x4mm Mild Steel Square Hollow Section Vertical Posts.
• 80x80x3mm Mild Steel Hinged Section with 40x40x3mm Cross Brace welded diagonally to corner.
• Standard Height 2.1m (can be manufactured to customer specification).
• Spans from 3m to 6m manufactured to customer specification. Comes complete with 'WARNING HEIGHT RESTRICTION' signage and padlock.
• Posts may be surface mounted or sunken.
• Can be supplied with additional latch post to lock both Cross member & Gate in the open position.
• Powder Coated to Customer Specification or Galvanised finishes available.

PF-5700 Double Swinging Access Gate + Height Barrier

• 100x100x4mm Mild Steel Square Hollow Section Vertical Posts.
• 80x80x3mm Mild Steel Hinged Section with 40x40x3mm Cross Brace welded diagonally to corner.
• Standard Height 2.1m (can be manufactured to customer specification).
• Spans from 6m to 12m manufactured to customer specification. Comes complete with 'WARNING HEIGHT RESTRICTION' signage and padlock.
• Posts may be surface mounted or sunken.
• Can be supplied with additional latch posts to lock both Cross members& Gates in the open position.
• Powder Coated to Customer Specification or Galvanised finishes available.