Security Fencing & Commercial Perimeter fences direct from the manufacturers


PF9000 Automatic Cantilever Sliding Gates

We are proud to present the PF9000 Sliding Gate. Unique to this brand, the PF9000 is a pioneering concept, using a simple yet reliable design, and introducing an external friction drive mechanism, to produce durable and efficient results

RT/R14 Heavy Duty Security Posts
DIMENSIONS:
Beam: 250mm x 225mm extruded Aluminium.
Infills: 30mm diameter x 6mm Wall thickness
POWER REQUIREMENT: 230V, 1 phase, 50Hz

DRIVE MOTOR:

0.55KWs, 3 phase
MAXIMUM SPAN: 10 Metres Drive-Through (14.5 Metre overall)
MAXIMUM HEIGHT: 2.4 Metres
DUTY CYCLE: 100%
OPERATION TIME: 4 Seconds per Metre (Variable)
FINISH: Powder-Coated
OPERATION: Friction-driven 3 phase motor via Inverter and Programmable Logic Controller.
ACCESS CONTROL OPTIONS:

Proximity Card Readers and Controllers, Keypads, Remote Control Transmitters, Push-Button control Raise/Stop/Lower, Intercom Systems, Token Acceptors, Counting Systems etc.

 

The PF9000 complies with safety features announced under the EU standards and regulations. Five profiled Safety Edges are provided; each consisting of 2 parallel electrically conducted rubber strips. These are connected to the main control panel by two cables, which are concealed within the lower beam, which transmit messages to and from the safety edges. In the unlikely event of a fault, messages will be transmitted to the necessary safety edges instructing the gate to be stopped, regardless of its current operation.

DRIVE MECHANISM

Our PF9000 Heavy Duty Automatic Sliding Gate employs a revolutionary – Patent Applied For - GB0713973.6 - External Friction Drive Mechanism ensuring a smooth, consistent, and quiet gate movement. As well as being the main drive, the External Friction Drive Mechanism also acts as the primary support roller of the gate ensuring a consistent contact between the drive roller and the underside of the lower beam. This is assisted by the dual stabilising support wheels located on either side of the drive roller.

A Manual Release Mechanism, concealed within the lockable housing unit, is included as standard, allowing manual control of the gate in the event of a power failure

An additional fully adjustable support unit is positioned in the runback area at a distance of approximately 40% of the length of the main lower beam to aid in the support of the gate when it is fully closed. Towards the back of the gate’s opening area a floor mounted support roller handles the weight of the gate in the fully open position.

Proximity sensors are used to indicate the start and end of the travel cycle.

Dual-height photo cells are fitted as standard, for safety to pedestrians and vehicles, on all PF9000 Heavy-Duty Automatic Sliding Gate. A Programmable Logic Controller, operated via an inverter, allows the user to adjust the speed to their individual requirements.

 

DESIGN FEATURES

Our PF9000 Cantilevered Automatic Sliding Gates are made to order and can be supplied with a height of up to 2.4 metres with a drive-through of up to 10 metres wide; all with a ground clearance of 125mm.

 

The main gate frame comprises of upper and lower 75mm square aluminium-tube rails with the main uprights made from the same material. The 30mm diameter infill’s, all having an 6mm wall thickness and set at 125mm centres, are mounted on our custom-made lower beam extrusion. The PF9000 is unique in that the External Friction Drive is incorporated into the lower beam as opposed to the inside face of the gate, protecting it from the elements, whilst also being completely out of view.

AESTHETICS

The PF9000 has a sophisticated, durable and secure appearance. Spikes line the top of the gate to warn off intruders, and the 6mm thick evenly-spaced individual Aluminium bars further add to the sturdy appearance. The compact housing of the electronics, coupled with the drive motor and supports being expertly hidden beneath the lower beam further enhance the neat and professional appearance.

INSTALLATION/BUILDING REQUIREMENTS

The PF9000 heavy-duty automatic sliding gate will be assembled and fully tested within the production factory, thus minimising the disruption on site. The gate will be delivered, ready to be lowered on to the pre-installed concrete plinths.

ACCESS CONTROL OPTIONS

Proximity Card Readers and Controllers, Keypads, Remote Control Transmitters, Push-Button control Raise/Stop/Lower, Intercom Systems, Token Acceptors, Counting Systems etc.

12 MONTHS WARRANTY ON ALL PRODUCTS

Beckland Hill, East Markham, Newark, Notts, NG22 0QP TEL: 08712 088771 | FAX: 08712 088772 | email: sales@total-fencing.co.uk

 

Links to our other websites:

Total Security | Roller Garage Doors | Two Way Radios | Retail Security & Tagging | Garage Doors | Ebay Store | Ebay RSS Feed

Business Listing & Web Design

 

We supply and install parking bollards, car parking bollards, parking bollard, retractable parking bollards, road traffic bollards, car park bollards, car park bollard, security bollards, automatic bollards, gatwick parking, lighting bollards, signs parking, traffic bollards, road bollards, parking street, safety bollards, parking car, parking barriers, highway bollards, driveway bollards, electric bollards, street bollards, pedestrian bollards, vehicle bollards, parking markings, bus bollards, parking barrier, parking law, light bollards, parking laws, car bollards, traffic parking, parking security, parking driveway, parking safety, parking systems, bollards, steel bollards, retractable bollards, concrete bollards, stainless steel bollards, removable bollards, bollard, deimos rising, demois rising, rising bollards, rising bollard, manchester rising bollards, rising bollards video, automatic rising bollards, cambridge rising bollards, manchester rising bollards video, rising bollards in manchester, rising bollard crash, rising traffic bollards, rising bollard accidents, manchester rising bollard, rising bollards damage, automatic rising bollard, rising bollards videos, rising bollards crash