Automatic Sliding Gate - Cantilevered - PF9000

The PF9000 cantilevered automatic sliding gates are made to order and can be supplied with a height of up to 2.4 metres with a drivethrough of up to 10 metres wide; all with a ground clearance of 125mm. The main gate frame comprises of upper and lower 75mm square aluminium-tube rails with the main uprights made from the same material.

As well as being the main drive, the External Friction Drive Mechanism also acts as the primary support roller of the gate ensuring a consistent contact between the drive roller and the underside of the lower beam. This is assisted by the dual stabilising support wheels located on either side of the drive roller. A Manual Release Mechanism, concealed within the lockable housing unit, is included as standard, allowing manual control of the gate in the event of a power failure. An additional fully adjustable support unit is positioned in the runback area at a distance of approximately 40% of the length of the main lower beam to aid in the support of the gate when it is fully closed. Towards the back of the gate’s opening area a floor mounted support roller handles the weight of the gate in the fully open position. Proximity sensors are used to indicate the start and end of the travel cycle.

Dual-height photo cells are fitted as standard
for safety to pedestrians and vehicles, on all PF9000 Heavy-Duty Automatic Sliding Gate. A Programmable Logic Controller, operated via an inverter, allows the user to adjust the speed to their individual requirements.

BS/EN 12453 Compliant
The PF9000 complies with safety features announced under the EU standards and regulations. Five profiled Safety Edges are provided; each consisting of 2 parallel electrically conducted rubber strips. These are connected to the main control panel by two cables, which are concealed within the lower beam, which transmit messages to and from the safety edges. In the unlikely event of a fault, messages will be transmitted to the necessary safety edges instructing the gate to be stopped, regardless of its current operation.

Design Features
Our PF9000 Cantilevered Automatic Sliding Gates are made to order and can be supplied with a height of up to 2.4 metres with a drivethrough of up to 10 metres wide; all with a ground clearance of 125mm. The main gate frame comprises of upper and lower 75mm square aluminium-tube rails with the main uprights made from the same material. The 30mm diameter infill's, all having an 6mm wall thickness and set at 125mm centres, are mounted on our custom made lower beam extrusion. The PF9000 is unique in that the External Friction Drive is incorporated into the lower beam as opposed to the inside face of the gate, protecting it from the elements, whilst also being completely out of view.

Aesthestics
The PF9000 has a sophisticated, durable and secure appearance. Spikes line the top of the gate to warn off intruders, and the 6mm thick evenly-spaced individual Aluminium bars further add to the sturdy appearance. The compact housing of the electronics, coupled with the drive motor and supports being expertly hidden.

Installation - Building Requirements
The PF9000 heavy-duty automatic sliding gate will be assembled and fully tested within the production factory, thus minimising the disruption on site. The gate will be delivered, ready to be lowered on to the pre-installed concrete plinths.

Access Control Options
Proximity Card Readers and Controllers, Keypads, Remote Control Transmitters, Push-Button control (Open/Stop/Close), Overriding Key Switches, Intercom Systems, Token Acceptors, Screen mounted or Chassis Mounted Transponders, Revenue Systems Counting Systems and L.E.D. Traffic Lights.

Infill Options
Tubular, Pallisade, Weld Mesh, Roll Top, Solid or Wooden Slats or Panels. Other options of infills are available gates can be totally custom made to suit your individual requirements.

• Specification: CE Approved
• Dimensions: 250mm x 225mm extruded Aluminium beam Infill – 30mm diameter x 6mm Wall thickness
• Power Requirement: 230V, 1 phase, 50Hz, Approx. 10 Amps
• Drive Motor: 0.75KWs - 1.1KWs, 3 phase
• Maximum Span: 10 Metres Drive-Through - (14 Metre overall)
• Maximum Height: 3.0 Metres
• Duty Cycle: 100%
• Operation Time: 4 Seconds per Metre (Variable)
• Finish: Etch Primed & Two Pack Spray Painted
• Operation: Friction-driven 3 phase motor via Inverter and Programmable Logic Controller
  Access Controls: Push-button, card readers, tokens, intercoms, Keypads, and Remote Fobs