Securifor 358 | High Security Fencing

Security fencing, Gate Automation, Perimeter Security & Access Control Solutions

Securifor 358 High Security fencing system Securifor 358 security fencing is world renouned for its performance as an anti-climb & anti-cut through barrier, whilst providing the lowest level of visual impact to the surroundings. Designed to give attractive, long lasting and secure perimeter protection for retail,industrial and commercial properties, schools, public utilities and is ideally suited for electronic alarm and detection systems - no blind spots for CCTV. Military, airports, secure units and prisons.

Manufactured from hard drawn wire and electro-resistance welded at every intersection. Mesh Pattern: 76.2mm (3") x 12.7mm (0.5") resistance welded at each intersection Horizontal Wires: 4mm diameter at 12.7mm centres Vertical Wires: 4mm diameter at 76.2mm centres Presentation: Overlapped 75mm minimum at each post for securing with slotted clamp bars and M8 diameter bolts. Weld strength: - 75% of the minimum tensile strength of the wire, Tensile range 540-690 N/m2
Securifor 358 Maximum Security System Securifor high security fencing is routinely specified by the Home Office and other security specialists for total perimeter protection to U.K. prisons, chosen for its long delay factors for climbing and cutting, and its "transparent" qualities for CCTV. Specified worldwide by major prison authorities, military and major gas, nuclear, electric and communications companies. Extra length panels for burying 300mm below finished ground level to prevent burrowing are available. Mesh Pattern: 76.2mm (3") at 12.7mm (0.5") resistance welded at each intersection Horizontal Wires: 4mm diameter at 12.7mm centres Vertical Wires: 4mm diameter at 76.2mm centres Presentation: Overlapped 75mm minimum at each post for securing with slotted clamp bars and M8 diameter cup square round bolts Weld strength: - 75% of the minimum tensile strength of the wire - Tensile range 540-690 N/m2 Extra Overs: Extra length panels for burying 300mm below finished ground level to prevent burrowing may be supplied on request


Securifor® 3D Securifor 3D is a complete system developed to combine high security with an aesthetic design - Recommended for applications requiring attractive design and high security such as schools, recreation, hospitals, railways, warehouses and commercial or industrial sites Mesh pattern: 76.2 mm (3") x 12.7mm (0.5") welded at each intersection Horizontal wires: 4 mm diameter at 12.7 mm centres Vertical wires: 4 mm diameter at 76.2 mm centres Weld strength: - 75% of the minimum tensile strength of the wire- Tensile range 540-690 N/m2

Securifor® 2D The new generation of Securifor® with double horizontal wires for higher penetration times and very high rigidity